Yoke Table Clampcarbon steel desk clamp for the AY90 and AY210 yoke bases

The clamp that holds force feedback down

The Table Clamp For Yoke is MOZA's desk mount for the AY90 and AY210 force feedback yoke bases. It has one specific job: keep the base on the edge of the desktop while it works the forces in the yoke. A force feedback base pushes back constantly, and without a rigid clamp it starts to creep across the desk — so this mount is part of the working setup rather than a decorative accessory. The clamp is made from carbon steel, a material that holds its torque and does not flex the way plastic does under load. It measures 91 × 82 × 30 mm and weighs 308 g, so under the desktop it is barely noticeable and stays out of the way of your knees. Installation is simple and needs no modification to the desk: the clamp slips over the edge of the desktop and is tightened with a hand-knob screw. MOZA officially lists compatibility with the MOZA AY210 and AY90 Force Feedback Yoke Base. For the AB9 flight base there is a different, heavier mount — the Flight Base Table Clamp. MOZA's official box contents read "Table Clamp For Yoke × 1", while the brand's own photos show a pair of clamps, so it is worth confirming the exact quantity with a GEEKSHOP manager when the order is confirmed.

1. 01

   Carbon steel and nothing extra

   The clamp is folded from carbon steel, with no plastic inserts anywhere in the load path. This is the case where a simple shape is the whole answer: steel holds its torque, does not loosen with vibration and does not spring back while the base is working. At 308 g it adds no meaningful mass to the desk.

2. 02

   A one-minute install

   The clamp slips over the edge of the desktop and tightens with a hand-knob screw — no modification, no drilling. On a rented flat or a shared desk that matters: it comes off as quickly as it goes on and leaves no marks behind.

3. 03

   Compact under the desktop

   The 91 × 82 × 30 mm footprint is chosen so the mount does not jut out from under the desk or crowd your knees. In a yoke setup your feet are busy on the rudder pedals, so any extra protrusion under the desktop gets annoying fast — and here there is almost none.

4. 04

   Made for the AY90 and AY210

   MOZA specifies this mount for the AY210 and AY90 Force Feedback Yoke Base. If you run an AB9 flight base you need the heavier Flight Base Table Clamp with its 5 mm steel plate instead. When planning a cockpit, order the base, the handle and the mount together — they are three separate items.